Bits Digital Archive
Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Jump to: | A | B | C | D | F | G | H | J | K | M | N | P | R | S | V
Number of items at this level: 119.

DUBEY, SATISH KUMAR (2014) Computational Modelling and Simulation of Heat Transfer during Steel Billet Reheating and Transport with Growth of Oxide Scale. PhD thesis, BITS-Pilani.

HUSSAINI, SYED MUJAHED (2014) Formability Studies of Austenitic Stainless Steel 316 at Elevated Temperatures. PhD thesis, BITS-Pilani.

JINDAL, ANIL (2015) Multi-objective Design and Optimization of a Closed-loop Supply Chain Network, and Assessment of Collection Methods, Product Recovery Methods and Network Configurations. PhD thesis, BITS.

KHANNA, NAVNEET (2013) Selected Experimental Studies on Machinability of Ti54M, Ti10.2.3, Ti5553 and Ti6Al4V Titanium Alloys. PhD thesis, BITS.

Krishna Jasti, Naga Vamsi (2014) An Empirical Investigation of Lean Enterprise in Indian Industry. PhD thesis, BITS-pilani.

KUMAR, VIJAY (2015) Wetting behaviour of silicon and dielectric materials attributed to texturing and self assembled monolayer. PhD thesis, BITS.

KUMAR , PAVAN G (2015) Mathematical Modeling, Numerical Simulation and Multi-Objective Optimization of Fused Deposition Modeling (FDM). PhD thesis, BITS.

REDDY , UMAMAHESHWERA P (2014) Studies on Development of Micro-Solid Lubricant Coating on Cutting Tools. PhD thesis, BITS-Pilani.

S, Jegadheeswaran (2012) Investigations on Particles Dispersed Latent Heat Thermal Energy Storage System for Solar Water Heaters. PhD thesis, BITS Pilani.

A

Anand, G and Kodali, Ram Babu (2006) A Conceptual Framework for Lean New Product Development. Natioal Conference on Design for Product Life Cycle, Feb 17-18 , 2006 BITS- Pilani . pp. 1-12.

B

BABU, METIKELA SREEDHAR (2016) Experimental Investigations and Modelling Studies on Performance of Spark Ignited Engine with Varied Composition of Producer gas. PhD thesis, BITS Pilani.

BELGAMWAR, SACHIN ULHASRAO (2014) Investigations on Multiwalled Carbon Nanotube Reinforced Copper. PhD thesis, BITS-Pilani.

BHAKAR, VIKRANT (2018) Development of a Sustainability Assessment Framework for Manufacturing Industry. PhD thesis, BITS Pilani.

BHAKAR, VIKRANT and Digalwar, A. K. and Sangwan, Kuldip Singh (2018) Sustainability assessment framework for manufacturing sector a conceptual model. Procedia CIRP .

BHAKAR, VIKRANT and Sangwan, Kuldip Singh and Sihag, Nitesh (2017) Bridging the qualification gap between academia and industry in India. Procedia Manufacturing Volume 9, 2017, Pages 275-282 . pp. 275-282.

BHAMU, JAIPRAKASH (2013) Development and Validation of Lean Manufacturing Drivers, Barriers and Framework with a Focus on Ceramic Industry. PhD thesis, BITS Pilani.

C

Chandran V, Girish (2016) Investigations on Rheological and Thermomechanical Properties of LLDPE - Fumed SilicaNanocomposites for Rotational Molding. PhD thesis, BITS Pilani.

CHAUDHARI , VIKAS VINAYAK (2013) Experimental and Computational Investigations on Fracture Behaviour of Extra Deep Drawn Steel Sheets in General Yield Regime. PhD thesis, BITS.

CHOUDHARY, KAILASH and Anshuman, Srivastava and Sangwan, Kuldip Singh and BHUNIA, DIPENDU (2017) A study on environmental and economic impacts of using waste marble powder in concrete. Journal of Building Engineering . pp. 87-95.

CHOUDHARY, KAILASH and Saad Ali, Soherwordi and Sangwan, Kuldip Singh (2019) Evaluation and comparison of environmental performance for shackle insulators – a case study. Management of Environmental Quality: An International Journal . pp. 400-413.

CHOUDHARY, KAILASH and Sangwan, Kuldip Singh (2018) Benchmarking Indian ceramic enterprises based on green supply chain management pressures, practices and performance. Benchmarking: An International Journal, 25 (9).

CHOUDHARY, KAILASH and Sangwan, Kuldip Singh and Goyal, Divyanshu (2019) Environment and economic impacts assessment of PET waste recycling with conventional and renewable sources of energy. Procedia CIRP . pp. 422-427.

D

Devika, D and Sangwan, Kuldip Singh and Raj, Punita (2020) Development of the Transversal Competencies in Learning Factories. Procedia Manufacturing . pp. 349-354.

Digalwar, A. K. and Sangwan, Kuldip Singh (2006) Performance Measurement System for Green Manufacturing. In: National Conference on Environmental Conservation (NCEC-2006) at BITS Pilani.

Dwivedy, maheshwar and Mittal, R.K. (2010) Future trends in computer waste generation in India. Waste Management, 30 (11). pp. 2265-2277.

DWIVEDY, MAHESHWAR (2013) Modeling and Assessment of e-waste Management Issues in India: Generation, Flows and Extended Producer Responsibility. PhD thesis, BITS Pilani.

F

FEMI , R (2017) Modeling and Analysis of Scalable Arcless Micromechanical Switches for Power Applications. PhD thesis, BITS Pilani.

G

GUPTA, GAJANAND (2019) Development of a Framework and Criticality Analysis Model for the Implementation of Reliability Centered Maintenance. PhD thesis, BITS Pilani.

H

HARIDAS, P (2012) Development and Validation of Quality Management Constructs For Software Industries. PhD thesis, BITS Pilani.

Harikrishnan, A R (2018) Correlating contact line capillarity and dynamic contact angle hysteresis in surfactant-nanoparticle based complex fluids. Physics of Fluids .

Harikrishnan, A R (2017) Effect of Interaction of Nanoparticles and Surfactants on the Spreading Dynamics of Sessile Droplets. Langmuir .

Harikrishnan, A R (2017) Effects of interplay of nanoparticles, surfactants and base fluid on the surface tension of nanocolloids. The European Physical Journal E .

Harikrishnan, A R (2018) Electrohydrodynamic fibrillation governed enhanced thermal transport in dielectric colloids under a field stimulus. Soft Matter .

Harikrishnan, A R (2018) Governing Influence of Thermodynamic and Chemical Equilibria on the Interfacial Properties in Complex Fluids. The Journal of Physical Chemistry B .

Harikrishnan, A R (2017) Influence of temperature and particle concentration on the pH of complex nanocolloids. Colloid and Polymer Science .

Harikrishnan, A R (2018) Ionic solubility and solutal advection governed augmented evaporation kinetics of salt solution pendant droplets. Physics of Fluids .

Harikrishnan, A R (2018) Magnetohydrodynamics- and magnetosolutal-transport-mediated evaporation dynamics in paramagnetic pendant droplets under field stimulus. Physical Review E .

Harikrishnan, A R (2017) Optical thermogeneration induced enhanced evaporation kinetics in pendant nanofluid droplets. International Journal of Heat and Mass Transfer .

Harikrishnan, A R (2018) Oscillatory solutothermal convection-driven evaporation kinetics in colloidal nanoparticle-surfactant complex fluid pendant droplets. PHYSICAL REVIEW FLUIDS .

Harikrishnan, A R (2018) Particle and surfactant interactions effected polar and dispersive components of interfacial energy in nanocolloids. Journal of Applied Physics .

Harikrishnan, A R (2017) Wettability of Complex Fluids and Surfactant Capped Nanoparticle-Induced Quasi-Universal Wetting Behavior. Journal of Applied Physics .

Harikrishnan, A R (2017) Wettability of Complex Fluids and Surfactant Capped NanoparticleInduced Quasi-Universal Wetting Behavior. The Journal of Physical Chemistry B .

J

JAKHAR, SANJEEV (2017) Design, Analysis and Development of Photovoltaic and Concentrating Photovoltaic Cooling Systems with Earth Water/Air Heat Exchanger. PhD thesis, BITS Pilani.

Jalan, A K and Gunerkar, Rohit (2019) Classification of Ball Bearing Faults Using Vibro-Acoustic Sensor Data Fusion. Experimental Techniques . pp. 43-5.

Jalan, A K and Gunerkar, Rohit and BELGAMWAR, SACHIN ULHASRAO (2018) Fault diagnosis of rolling element bearing based on artificial neural network. Journal of Mechanical Science and Technology .

Jalan, A K and Patil, Shital and Mittal, Gaurav (2020) A Review on Fault Diagnosis of Misaligned Rotor Systems. International Journal of Performability Engineering . ISSN Totem Publisher

JAVED, ARSHAD (2014) Development of Integrated Design Methodologies to Investigate the Effects of Control Factors and Uncertainties on Topologically Optimized Structures for Robust and Reliable Performances. PhD thesis, BITS.

Jindal, Anil and Sangwan, Kuldip Singh (2016) Multi-objective fuzzy mathematical modelling of closed-loop supply chain considering economical and environmental factors. Innovative Supply Chain Optimization .

JOSEPH, THOMAS (2013) Application of Conjoint Analysis to the Fuzzy Front End of a Product Design: A Case Study of the Indian Auto Industry. PhD thesis, BITS.

K

K , Soumya and R, Vandana and Mittal , R.K. and Sharma, N N (2006) Design of VACUUM CHAMBER for CNT Fabrication using Finite Element method. atioal Conference on Design for Product Life Cycle, Feb 17-18 , 2006 BITS- Pilani . pp. 1-5.

Kandpal, Kavindra and GUPTA, NAVNEET and Singh, Jitendra and SHEKHAR, Chandra (2020) On the Threshold Voltage and Performance of ZnO-Based Thin-Film Transistors with a ZrO2 Gate Dielectric. Journal of ELECTRONIC MATERIALS, 49 (5).

KANT, GIRISH (2016) Prediction and Optimization of Machining Parameters for Minimizing Surface Roughness and Power Consumption during Turning of AISI 1045 Steel. PhD thesis, BITS Pilani.

KANT, GIRISH and Sangwan, Kuldip Singh (2018) Development of an Empirical Model for Optimization of Machining Parameters to Minimize Power Consumption. IOP Conference Series: Materials Science and Engineering .

KING, CALVIN SOPHISTUS (2008) Integrated Energy Supply to the Indian Rural Domestic Sector with particular reference to Coimbatore District in Tamil Nadu – Study of Issues and Development of Strategies. PhD thesis, BITS Pilani.

KIRAN, C PHANEENDRA (2012) Experimental Investigation for Quality Evaluation and Concurrent Design Principles Applied to CNC Turning. PhD thesis, BITS Pilani.

KOTKUNDE, NITIN RAMESH (2015) Experimental and Numerical Investigations of Forming Behavior in Ti-6Al-4V Alloy at Elevated Temperatures. PhD thesis, BITS.

KULKARNI, ANANT CHANDRAKANTRAO (2015) Experimental Wear Characterization of Metal-Polyethylene Hip Implant Materials using Designed and Developed Screening Devices. PhD thesis, BITS Pilani.

Kulkarni, D M and Prakash, R (2008) Effect of thickness on fracture criterion in general yielding fracture mechanics. International Journal of Fracture, 151 (2). pp. 187-198.

KUMAR, C. V. SUNIL (2016) Design of Supplier Development Programs for Indian Manufacturing Companies - A Supply Chain Perspective. PhD thesis, BITS Pilani.

Kumar, Rajesh (2017) An Investigation of Lab Scale Oxygen-Enriched Bubbling Fluidized Bed Combustor for Co-Firing Conditions. PhD thesis, BITS Pilani.

KUMAR, SRAVAN (2018) Atomized Liquid Nitrogen Spray Assisted Machining of Al-TiCp Metal Matrix Composites with Different Tool Geometry. PhD thesis, BITS Pilani.

Kumar , Rakesh (2018) Machinability Studies of Ti-6Al-4V Alloy Using Novel Minimal Solid Lubricant Mixture Application Method. PhD thesis, BITS Pilani.

M

MADHAVI, BARLA (2017) Experimental and Numerical Studies of Friction Stir Welded Joints of Aluminium-alloy (AA5052-H32) Plates. PhD thesis, BITS Pilani.

MITTAL, VARINDER KUMAR (2013) Development and Validation of Drivers for, Barriers to and Stakeholders of Green Manufacturing. PhD thesis, BITS Pilani.

MOHANTY, DILLIP KUMAR (2012) Estimation and Prediction of Fouling Behaviour in a Shell-and-Tube Heat Exchanger. PhD thesis, BITS Pilani.

N

Naga Vamsi , Krishna and Sangwan, Kuldip Singh (2019) An application of value stream mapping in auto-ancillary industry: a case study. The TQM Journal .

Nithin Tom, Mathew (2019) Wear of Electroplated Super Abrasive CBN Wheel during Grinding of Inconel 718 Super Alloy. Journal of Manufacturing Processes .

P

Potdar, Pavan Kumar (2017) Development of Agility Enhancement Strategies for Agile Manufacturing. PhD thesis, BITS Pilani.

Prabhu, B. Vittaldasa (2006) Design For Optimum Life : Indian Commercial Vehicle Scenario. Natioal Conference on Design for Product Life Cycle, Feb 17-18 , 2006 BITS- Pilani . pp. 1-6.

R

Ranjani, J. Jennifer (2016) Arduino Based Sun Positioning for Linear Fresnel Solar Concentrating System with Horizontal Absorber and Varying Width Reflectors. I J C T A, 9 (31). pp. 377-388.

RATHORE, JITENDRA SINGH (2014) Investigations on the Dynamics and Design of Uniflagellated Nanoswimmers using Resistive Force Theory. PhD thesis, BITS.

REDDY, T JANARDHANA (2018) Studies on Structural Configurations for Vehicular Crash Energy Absorption. PhD thesis, BITS Pilani.

Reosekar, Ravi Shrikrishna (2015) An Empirical Investigation of Six Sigma Practices in Indian Manufacturing Industry. PhD thesis, BITS Pilani.

Rout, B.K. and Mittal , R.K. (2006) Reliability Based Approach to Manipulator Parameter Design. Natioal Conference on Design for Product Life Cycle, Feb 17-18 , 2006 BITS- Pilani . pp. 1-7.

ROUT, BIJAY KUMAR (2006) Minimizing Manipulator Performance Variability by Selecting Control Parameters and Tolerances for Optimal Robust Designs of Manipulators. PhD thesis, BITS Pilani.

Routroy, Srikanta and Kodali, Ram Babu (2006) Evaluation of Supply Chain Inventory Performance Measures Through ARENA Simulation Tool. Natioal Conference on Design for Product Life Cycle, Feb 17-18 , 2006 BITS- Pilani .

Routroy, Srikanta and Krishnan , V R V R (2006) Camera Ready : A Decision Framework for selection of Supply Chain Performance Measures Along the Product Life Cycle. Natioal Conference on Design for Product Life Cycle, Feb 17-18 , 2006 BITS- Pilani . pp. 1-8. (Submitted)

S

S, Kannan (2011) A diagnostic approach to Weibull‐Weibull stress‐strength model and its generalization. International Journal of Quality & Reliability Management, 28 (4).

SANGWA, NARPAT RAM (2019) Development of an Integrated Performance Measurement Framework for Leanness Assessment of Manufacturing Organizations. PhD thesis, BITS Pilani.

Sangwan, Kuldip Singh (2017) Adoption of Integrated Lean-Green-Agile Strategies for Modern Manufacturing Systems. Procedia CIRP , 61 . pp. 463-468.

Sangwan, Kuldip Singh (2019) Benchmarking environmental performance of electric insulator supply chain in India using life cycle assessment. LIFE CYCLE SUSTAINABILITY ASSESSMENT . pp. 518-529.

Sangwan, Kuldip Singh (2006) Concurrent Engineering : An Integrated Approach for Product Life Cycle Design. Natioal Conference on Design for Product Life Cycle, Feb 17-18 , 2006 BITS- Pilani . pp. 1-6.

Sangwan, Kuldip Singh (2018) Development of an integrated performance measurement framework for lean organizations. Journal of Manufacturing Technology Management .

Sangwan, Kuldip Singh (2020) Environmental impact assessment of fly ash and silica fume based geopolymer concrete. Journal of Cleaner Production .

Sangwan, Kuldip Singh (2019) Implementation of a cyber-physical cooling storage station in a learning factory. Procedia Manufacturing Volume 31, 2019, Pages 142-147, 31 . pp. 142-147.

Sangwan, Kuldip Singh (2020) Integrating virtual and physical production processes in learning factories. Procedia Manufacturing . pp. 121-127.

Sangwan, Kuldip Singh (2017) Key activities, decision variables and performance indicators of reverse logistics. Procedia CIRP, 61 . pp. 257-262.

Sangwan, Kuldip Singh (2018) Leanness assessment of organizational performance: a systematic literature review. Journal of Manufacturing Technology Management . pp. 768-788.

Sangwan, Kuldip Singh (2006) Performance Measures for Environmentally Conscious Production. In: National Conference on Environmental Conservation (Ncec-2006) at BITS Pilani.

Sangwan, Kuldip Singh and BHAKAR, VIKRANT (2017) Life cycle analysis of HDPE pipe manufacturing – a case study from an Indian industry. Procedia CIRP Volume . pp. 738-743.

Sangwan, Kuldip Singh and BHAKAR, VIKRANT (2018) Measuring Carbon Footprint of an Indian University Using Life Cycle Assessment. Procedia CIRP 69 . pp. 475-480.

Sangwan, Kuldip Singh and BHAKAR, VIKRANT and Digalwar, A. K. (2019) A sustainability assessment framework for the cement industry – a case study. Benchmarking: An International Journal .

Sangwan, Kuldip Singh and BHAKAR, VIKRANT and Digalwar, A. K. (2018) Sustainability assessment in manufacturing organizations: Development of assessment models. Benchmarking: An International Journal (25).

Sangwan, Kuldip Singh and BHAKAR, VIKRANT and Singh, R (2017) Transferring experience labs for production engineering students to universities in newly industrialized countries. IOP Conference Series: Materials Science and Engineering .

Sangwan, Kuldip Singh and CHOUDHARY, KAILASH (2017) Benchmarking manufacturing industries based on green practices. Benchmarking: An International Journal . pp. 1746-1761.

Sangwan, Kuldip Singh and CHOUDHARY, KAILASH (2019) Multiple case study analysis and development of an interpretive structural model for greening of supply chains in Indian ceramic enterprises. Supply chains in Indian ceramic enterprises .

Sangwan, Kuldip Singh and CHOUDHARY, KAILASH and Batra, Chirag (2018) Environmental impact assessment of a ceramic tile supply chain – a case study. INTERNATIONAL JOURNAL OF SUSTAINABLE ENGINEERING .

Sangwan, Kuldip Singh and KANT, GIRISH (2017) Optimization of Machining Parameters for Improving Energy Efficiency using Integrated Response Surface Methodology and Genetic Algorithm Approach. Procedia CIRP , 61, . pp. 517-522.

Sangwan, Kuldip Singh and Sihag, Nitesh (2018) Development of a multi-criteria optimization model for minimizing carbon emissions and processing time during machining. Procedia CIRP .

Sangwan, Kuldip Singh and Sihag, Nitesh (2019) Development of a sustainability assessment index for machine tools. Procedia CIRP . pp. 156-161.

Sangwan, Kuldip Singh and Sihag, Nitesh (2019) Multi-objective optimization for energy-efficient machining with high productivity and quality for a turning process. Procedia CIRP . pp. 67-72.

Sangwan, Kuldip Singh and Soni, M.S. and Sihag, Nitesh and BHAKAR, VIKRANT (2018) Comparative Analysis for Solar Energy Based Learning Factory: Case Study for TU Braunschweig and BITS Pilani. Procedia CIRP . pp. 407-411.

SARMA, T.CHANDRASEKHARA (2007) Analysis, Development of Reconfigurable Systems and Modelling towards the Automation of Remote Sensing Satellite Data Acquisition. PhD thesis, BITS Pilani.

Sharma, Monical and Kodali, Ram Babu (2006) Innovative Product Planning As A Pillar For Manufacturing Excelence. Natioal Conference on Design for Product Life Cycle, Feb 17-18 , 2006 BITS- Pilani . pp. 1-8. (Submitted)

SIDDAVATAM, RAJESH (2007) Robot Motion Planning using Splines, Wavelets and Image Sampling. PhD thesis, BITS Pilani.

Sihag, Nitesh and Sangwan, Kuldip Singh (2019) An improved micro analysis-based energy consumption and carbon emissions modeling approach for a milling centre. The International Journal of Advanced Manufacturing Technology . pp. 705-721.

Sihag, Nitesh and Sangwan, Kuldip Singh (2019) The Influence of Manufacturing Plant Site Selection on Environmental Impact of Machining Processes. Procedia CIRP . pp. 186-191.

Sihag, Nitesh and Sangwan, Kuldip Singh and Pundir, Siddhant (2018) Development of a structured algorithm to identify the status of a machine tool to improve energy and time efficiencies. Procedia CIRP .

Singh, Amit Kumar (2006) Product Life Cycle : A Case study. Natioal Conference on Design for Product Life Cycle, Feb 17-18 , 2006 BITS- Pilani . pp. 1-9.

Singh, Amit R. (2020) Finite Temperature Phase Behavior of Viral Capsids as Oriented Particle Shells. PHYSICAL REVIEW LETTERS .

SINGH, RAJNI and Sangwan, Kuldip Singh (2019) Research-based Learning for Skill Development of Engineering Graduates: An empirical study. Procedia Manufacturing , Volume 31, . pp. 323-329.

SINGH, VARINDER (2013) Study of Restructuring Decisions and Complexity of Lean Manufacturing Systems. PhD thesis, BITS.

Singru, P M (2015) Experimental Learning :if we have to ignite the young minds, right from high school, experimental learning should be made mandatory instead of rote learning. Times of India .

Soni, M.S. Techno-economic parametric assessment of solar power in India: A survey. Renewable and Sustainable Energy Reviews, 40 . pp. 326-334.

Srinivasan , P (2015) CARBON CAPTURE AND STORAGE :THE FUTURE OF POWER GENERATION IN INDIA. Energy Future , 3 (2). pp. 36-42.

SURESH, V.V.N. SATYA (2018) Minimization of Weld Line Movement and Improvement of Accuracy in Heat Assisted Forming of Tailor Welded Blanks. PhD thesis, BITS Pilani.

V

Venkatraman, P B and Kodali, Ram Babu (2006) An Extended Scope of Product Life Cycle. Natioal Conference on Design for Product Life Cycle, Feb 17-18 , 2006 BITS- Pilani .

VINAYAK, K (2013) An Investigation of Innovative Product Development Practices in Indian Manufacturing Industry. PhD thesis, BITS.

Vxashishtha, Sanjay (2005) Condensate Recovery. In: Workshop on Energy Soving in Steam System 26-30 April 2005.

This list was generated on Mon Oct 26 01:02:38 2020 IST.